View B39182B8562P810_8387777.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer wcdma/lte band ix series/type: ordering code: b8562 B39182B8562P810 date: version: october 19, 2011 2.0 ? epcos ag 201 5 . reproduction, pub lication and dissemination of this p ublicatio n, enclosures h ereto and the i nformation containe d therein without epcos' prior ex press consent is prohibited. epcos ag is a tdk group company.
2 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone wcdma/lte band ix systems n low insertion attenuation n low amplitude ripple n usable passband 35 mhz n single ended to balanced transformation in antenna - rx path n impedance transformation 50 w to 100 w in antenna - rx path features n package size 2.0 x 1.6 mm 2 n package height 0.47 mm max. n rohs compatible n approx. weight 0.006g n package for s urface m ount t echnology ( smt ) n ni terminals, au-plated n balanced rx port, unbalanced tx port n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel ( msl ) 3 bottom view side view top view 1 2 3 5 6 7 8 4 9 0.43 0.33 0.35 0.29 0.7 0.47 max. 7 5 2 6 1 3 8 4 2.0 1.6 0.29 pin configuration n 1 tx input, unbalanced n 3, 4 rx output, balanced n 6 antenna n 2, 5, 7, 8, 9 to be grounded 2, 5, 7, 8, 9 13 6 4
3 october 19, 2011 b8562 1767.4 / 1862.4 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = -30?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx = 100 w (balanced) || 8.2 nh tx terminating impedance: z tx =50 w characteristics tx - ant min. typ. @ 25 ?c max. center frequency f c 1767.4 mhz maximum insertion attenuation 1749.9 ... 1784.9 mhz 1.4 1.9 db @f carrier 1752.4 ... 1782.4 mhz a wcdma 1) 1) attenuation of wcdma signal(powertransferfunction).please refer to annotation on page (8). 1.4 1.9 db amplitude ripple (p-p) 1749.9 ... 1784.9 mhz 0.4 0.8 db @f carrier 1752.4 ... 1782.4 mhz a wcdma 3) 0.4 0.8 db error vector magnitude @f carrier 1752.4 ... 1782.4 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.3 2.0 % input vswr (tx port) 1749.9 ... 1784.9 mhz 1.4 1.8 output vswr (ant port) 1749.9 ... 1784.9 mhz 1.5 1.8
4 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = -30?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx = 100 w (balanced) || 8.2 nh tx terminating impedance: z tx =50 w characteristics tx - ant min. typ. @ 25 ?c max. attenuation a 10.0 ... 95.0 mhz 30 80 db 470.0 ... 770.0 mhz 30 48 db 810.0 ... 828.0 mhz 30 47 db 860.0 ... 895.0 mhz 30 46 db 921.0 ... 960.0 mhz 30 45 db 1475.9 ... 1500.9 mhz 30 38 db 1500.9 ... 1565.42 mhz 30 38 db 1565.42 ... 1573.374 mhz 35 41 db 1573.374 ... 1577.466 mhz 35 41 db 1577.466 ... 1585.42 mhz 35 42 db 1597.5515 ... 1605.886 mhz 40 44 db 1605.886 ... 1680.0 mhz 25 31 db 1805.0 ... 1845.0 mhz 1 4 db 1844.9 ... 1879.9 mhz 45 49 db @f carrier 1847.4 ... 1877.4 mhz a wcdma 1) 1) attenuation of wcdma signal(powertransferfunction).please refer to annotation on page (8). 45 49 db 1884.5 ... 1919.6 mhz 40 44 db 2110.0 ... 2170.0 mhz 27 40 db 2400.0 ... 2500.0 mhz 35 40 db 3500.0 ... 3570.0 mhz 20 31 db 5150.0 ... 5355.0 mhz 20 23 db 5725.0 ... 5850.0 mhz 18 21 db
5 october 19, 2011 b8562 1767.4 / 1862.4 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx = 100 w (balanced) || 8.2 nh tx terminating impedance: z tx =50 w characteristics ant - rx min. typ. @ 25 ?c max. center frequency f c 1862.4 mhz maximum insertion attenuation 1844.9 ... 1879.9 mhz 2.0 2.6 db @f carrier 1847.4 ... 1877.4 mhz a wcdma 1) 1) attenuation of wcdma signal(powertransferfunction).please refer to annotation on page (8). 2.0 2.6 db amplitude ripple (p-p) 1844.9 ... 1879.9 mhz 0.4 0.7 db @f carrier 1847.4 ... 1877.4 mhz a wcdma 3) 0.3 0.7 db common mode rejection ratio cmrr 1844.9 ... 1879.9 mhz 21 2) 2) a combination of 10 o phase balance and 1db amplitude balance corresponds to 19.6 db cmrr. 26 db input vswr (ant port) 1844.9 ... 1879.9 mhz 1.4 1.8 output vswr (rx port) 1844.9 ... 1879.9 mhz 1.4 1.8
6 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx = 100 w (balanced) || 8.2 nh tx terminating impedance: z tx =50 w characteristics ant - rx min. typ. @ 25 ?c max. attenuation a 10.0 ... 95.0 mhz 70 80 db 614.9 ... 626.7 mhz 45 80 db 922.5 ... 940.0 mhz 45 80 db 1654.9 ... 1689.9 mhz 35 56 db 1689.9 ... 1750.0 mhz 35 54 db 1749.9 ... 1784.9 mhz 48 58 db @f carrier 1752.4 ... 1782.4 mhz a wcdma 1) 1) attenuation of wcdma signal(powertransferfunction).please refer to annotation on page (8). 48 58 db 1965.0 ... 2400.0 mhz 15 52 db 2400.0 ... 2497.0 mhz 30 57 db 3594.8 ... 3664.8 mhz 40 60 db 3689.8 ... 3759.8 mhz 35 60 db 5344.7 ... 5449.7 mhz 40 51 db 5534.7 ... 5639.7 mhz 35 51 db 5639.7 ... 5650.0 mhz 35 51 db imd product level limits 2) at f tx = 1767.4 mhz f rx = 1862.4 mhz 2) imd product level limits for power levels p tx =21.5db (antenna port output power) and p block- er =-15dbm (antenna port input power). blocker 1 95.0 mhz -130 -105 dbm blocker 2 1672.4 mhz -110 -105 dbm blocker 3 3629.8 mhz -117 -105 dbm blocker 4 5397.2 mhz -122 -105 dbm
7 october 19, 2011 b8562 1767.4 / 1862.4 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant =50 w || 3.6 nh rx terminating impedance: z rx = 100 w (balanced) || 8.2 nh tx terminating impedance: z tx =50 w characteristics tx - rx min. typ. @ 25 ?c max. differential mode isolation a 1749.9 ... 1784.9 mhz 54 58 db @f carrier 1752.4 ... 1782.4 mhz a wcdma 1) 1) attenuation of wcdma signal(powertransferfunction).please refer to annotation on page (8). 54 58 db 1844.9 ... 1879.9 mhz 50 54 db @f carrier 1847.4 ... 1877.4 mhz a wcdma 3) 50 54 db common mode isolation a 1749.9 ... 1784.9 mhz 51 55 db @f carrier 1752.4 ... 1782.4 mhz a wcdma 3) 51 55 db
8 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 9-passband, f carrier ranges from 1752.4 mhz (lowest tx channel) to 1782.4 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) v machine model, 10 pulses input power at p in source and load impedance 50 w 1749.9 ... 1784.9 mhz elsewhere 29 10 dbm dbm continuous wave t = 50?c, 5.000 h 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. } s s d21 f () h rrc ff carrier C () 2 f d h rrc f () 2 f1 = d
9 october 19, 2011 b8562 1767.4 / 1862.4 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (passband) frequency response tx-ant (wideband)
10 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response ant-rx (passband) frequency response ant-rx (wideband)
11 october 19, 2011 b8562 1767.4 / 1862.4 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (passband) / differential mode frequency response tx-rx (wideband) / differential mode
12 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx (passband) / common mode frequency response tx-rx (wideband) / common mode
13 october 19, 2011 b8562 1767.4 / 1862.4 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. return loss s 11 tx - port s 22 ant - port s 33 rx - port
14 october 19, 2011 b8562 1767.4 / 1862.4 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8562 ordering code B39182B8562P810 marking and package c61157-a8-a40 packaging f61074-v8247-z000 date codes l_1126 s-parameters b8562_nb.s4p, b8562_wb.s4p see file header for port/pin assignment table. soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2011. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
15 october 19, 2011 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39182B8562P810

	To Download B39182B8562P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .